B1424-IMPROPER DVD-WRONG REGION
For a complete wiring diagram Refer to Section 8W.
- When Monitored:
Continuously with the ignition on and the DVD player turned on.
- Set Condition:
The code will set if a DVD that is not formatted as a DVD is installed in the DVD player.
| Possible Causes |
| DVD READ FAILURE |
Diagnostic Test
1. DVD PLAYERReplace the problem DVD with a good, clean, unscratched DVD.
Turn the DVD player on.
With the scan tool, read DTC's.
Does the scan tool display active: B1424-IMPROPER DVD-WRONG REGION?
Yes
- Eject the inoperative DVD and replace the DVD in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST — VER 1.
No
- Test Complete.