Home Audio/Visual/Telematics PARK ASSIST / MONITORING LEXUS PARKING ASSIST-SENSOR SYSTEM

LEXUS PARKING ASSIST-SENSOR SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.
  3. When open circuit indication is displayed in self-check function, check for DTCs and troubleshoot according to each inspection procedure.


General 
Symptom
Suspected Area
See page
System does not operate at all (self-check function does not operate)
Clearance warning ECU assembly power source circuit
Click here
Clearance sonar main switch circuit
Click here
Clearance warning ECU assembly
Click here
System can not be turned off
Proceed to "Clearance Sonar Main Switch Circuit"
Click here
Clearance warning ECU assembly
Click here

Sonar Function 
Symptom
Suspected Area
See page
Frozen indication is displayed in self-check function
Precaution
Click here
Replace ultrasonic sensor in part where frozen indication is displayed
-
Clearance warning ECU assembly
Click here
Combination meter assembly (shift indicator) operates normally, but detection operates when park (P) has been selected, or detection does not operate when a shift state other than park (P) has been selected (front ultrasonic sensor)
CAN communication system
Click here
Clearance warning ECU assembly
Click here
Combination meter assembly (shift indicator) operates normally, but detection operates when a shift state other than reverse (R) has been selected, or does not operate with reverse (R) selected (rear ultrasonic sensor)
CAN communication system
Click here
Clearance warning ECU assembly
Click here
Detection operation operates even when vehicle speed exceeds the operation condition speed
CAN communication system
Click here
Clearance warning ECU assembly
Click here

Buzzer Function 
Symptom
Suspected Area
See page
Sonar detection operation is normal but buzzer operation is intermittent
Clearance warning buzzer circuit
Click here
Clearance warning ECU assembly
Click here

Display Function 
Symptom
Suspected Area
See page
Detection operation is normal but clearance sonar indicator does not illuminate
CAN communication system
Click here
Combination meter assembly (Active Test)
Click here
Clearance warning ECU assembly
Click here
Detection operation is normal but all sonar displays do not appear
CAN communication system
Click here
Clearance warning ECU assembly
Click here
Detection operation is normal but sonar displays of multi-information display do not appear
CAN communication system
Click here
Combination meter assembly
Click here
Clearance warning ECU assembly
Click here
Detection operation is normal but sonar displays of multi-display do not appear*1
CAN communication system
Click here
Multi-display
Click here
Display and navigation module display
Click here
Clearance warning ECU assembly
Click here
Detection operation is normal but sonar displays of multi-display do not appear*2
CAN communication system
Click here
Multi-display
Click here
Navigation computer sub-assembly
Click here
Clearance warning ECU assembly
Click here
*1: w/ DVD Navigation System
*2: w/ HDD Navigation System