CD Sound Skips

INSPECTION PROCEDURE

1. CHECK CD

1. Check the CD.

   OK:

   The CD is clean.
   

   HINT:

   If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

   NOTICE:

   Do not use a conventional record cleaner or anti-static preservative.

NG	CLEAN CD

OK

2. CHECK CD

1. Check that the CD is not deformed or cracked.

   OK:

   No deformation or cracks on the CD.
   

NG	CHANGE DISC

OK

3. CHECK OPERATION

1. Check using another CD.

   1. Check if the problem recurs using another CD.

      OK:

      The problem does not occur.
      

OK	END

NG

4. CHECK RADIO RECEIVER

1. Check the radio receiver installation condition.

   1. Check that the radio receiver is properly installed.

      OK:

      Radio receiver is properly installed.
      

NG	REINSTALL RADIO RECEIVER PROPERLY

OK
REPLACE RADIO RECEIVER