Lexus IS250 · Service Manual BODY

HOW TO PROCEED WITH TROUBLESHOOTING

Troubleshooting

HINT:
  1. Use these procedures to troubleshoot the sliding roof system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP
    NEXT

    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      1. If the voltage is below 11 V, recharge or replace the battery before proceeding.
    NEXT

    3.INSPECT COMMUNICATION FUNCTION OF MULTIPLEX COMMUNICATION SYSTEM (BEAN)*

    1. Using the intelligent tester, check if the Multiplex Communication System (MPX) is functioning normally.

      Result 
      Result
      		 Proceed to
      MPX DTC is not output
      		 A
      MPX DTC is output
      		 B


    		B.
    A

    4.PROBLEM SYMPTOMS TABLE
      Result 
      Result
      		 Proceed to
      Fault is not listed in problem symptoms table
      		 A
      Fault is listed in problem symptoms table
      		 B

    		B.
    A

    5.OVERALL ANALYSIS AND TROUBLESHOOTING*
      1. Data List / Active Test (Click here)
      2. Terminals of ECU (Click here)
      3. On-vehicle Inspection (Click here)
    NEXT

    6.ADJUST, REPAIR OR REPLACE
      NEXT

      7.CONFIRMATION TEST
        NEXT

        ← SYSTEM DESCRIPTIONCUSTOMIZE PARAMETERS →