| Last Modified: 11-27-2007 | 1.6 C | |
| Service Category: Audio/Visual/Telematics | Section: Navigation/Multi Info Display | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000182R02RX |
| Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: DESCRIPTION (2008 LX570) | ||
|
DTC |
58-10 |
Gyro Error |
|
DTC |
80-10 |
Gyro Error |
DESCRIPTION
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
58-10 |
A ground short, power supply short, or open circuit in the gyro signal. |
Display and navigation module display |
|
80-10 |
A ground short, power supply short, or open circuit in the gyro signal. |
INSPECTION PROCEDURE
HINT:
After the inspection is completed, clear the DTCs
.
PROCEDURE
|
1. |
CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE) |
|
(a) Enter the "Navigation Check" mode and select "Vehicle Sensors"
|
(b) Check the gyro voltage.
Standard voltage:
0.5 to 4.5 V
|
|
2. |
CLEAR DTC |
(a) Clear the DTCs
.
|
|
3. |
RECHECK DTC |
(a) Recheck for DTCs and check if the same trouble code is output.
HINT:
If DTCs are output frequently, replace the display and navigation module display.
OK:
No DTC is output.
|
|
|