| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Brake | Section: Parking Brake | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002JL0005X |
| Title: PARKING BRAKE: PARKING BRAKE LEVER: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL PARKING BRAKE SWITCH ASSEMBLY
(a) Install the parking brake switch with the screw.
Torque: 0.9 N·m (9 kgf·cm, 8 in·lbf)
2. INSTALL PARKING BRAKE LEVER SUB-ASSEMBLY
|
(a) Install the parking brake lever with the 2 bolts. Torque: 25 N·m (255 kgf·cm, 18 ft·lbf) |
(b) Install the parking brake lever support with the 2 bolts.
Torque: 25 N·m (255 kgf·cm, 18 ft·lbf)
(c) Install the straight pin to the parking brake lever.
|
(d) Connect the No. 2 parking brake cable and No. 3 parking brake cable to the No. 1 parking brake pull rod. |
|
(e) Install the bush, compression spring and No. 1 parking brake pull rod to the parking brake lever with the adjusting nut. |
(f) Install the parking brake return spring.
(g) Connect the parking brake switch connector.
3. INSPECT PARKING BRAKE LEVER TRAVEL
4. ADJUST PARKING BRAKE LEVER TRAVEL
5. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(a) Install the rear console box sub-assembly
.
6. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)
(a) Install the cooling box assembly
.
7. INSTALL FRONT SEAT ASSEMBLY LH (w/ Cool Box)
(a) Install the front seat assembly LH
.
8. CHARGE REFRIGERANT (w/ Cool Box)
9. WARM UP ENGINE (w/ Cool Box)
10. CHECK FOR REFRIGERANT GAS LEAK (w/ Cool Box)
11. INSTALL UPPER RADIATOR SUPPORT SEAL (w/ Cool Box)
12. INSTALL ENGINE ROOM SIDE COVER RH (w/ Cool Box)
13. INSTALL ENGINE ROOM SIDE COVER LH (w/ Cool Box)
|
|