Home › Audio/Visual/Telematics › Cellular Communication › MAYDAY BATTERY
Last Modified: 11-27-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Cellular Communication
Model Year: 2008 Model: LX570 Doc ID: RM000002PBU003X
Title: CELLULAR COMMUNICATION: MAYDAY BATTERY: INSTALLATION (2008 LX570)

INSTALLATION

HINT:

A bolt without a torque specification is shown in the standard bolt chart SPECIFICATIONS: STANDARD BOLT: SPECIFIED TORQUE FOR STANDARD BOLTS (2008 LX570) .

1. INSTALL MAYDAY BATTERY

(a) Install the battery to the bracket.

2. INSTALL MAYDAY BATTERY WITH BRACKET

(a) Attach the bracket and battery to the bracket with the 2 claws as shown in the illustration.

(b) Install the bracket with the nut.

Torque: 12 N·m (122 kgf·cm, 9 ft·lbf)

(c) Attach the clamp.

3. INSTALL TELEPHONE ECU ASSEMBLY WITH BRACKET CELLULAR COMMUNICATION: MAYDAY ECU: INSTALLATION (2008 LX570)+

4. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

6. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

7. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 LX570) .

8. PERFORM REGISTRATION

(a) Perform registration CELLULAR COMMUNICATION: LEXUS LINK SYSTEM: REGISTRATION (2008 LX570) .

NOTICE:

When replacing the portable phone battery or telephone ECU (together with the portable phone battery), perform registration.