| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Theft Deterrent/Keyless Entry | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002QFT00CX |
| Title: THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Rear Floor): INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL INDOOR ELECTRICAL KEY OSCILLATOR
|
(a) Attach the 2 claws to install the electrical key oscillator. |
(b) Connect the connector.
(c) Install the front floor carpet assembly.
2. INSTALL REAR NO. 2 SEAT PROTECTOR
3. INSTALL REAR NO. 1 SEAT PROTECTOR
4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
(a) Install the front quarter trim panel assembly LH
.
5. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
(a) Install the front quarter trim panel assembly RH
.
6. INSTALL REAR NO. 2 SEAT ASSEMBLY
(a) Install the rear No. 2 seat assembly
.
7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
(a) Install the rear No. 1 seat assembly RH
.
8. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
(a) Install the rear No. 1 seat assembly LH
.
9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
10. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light
.
11. INSTALL ENGINE ROOM SIDE COVER LH
|
|