1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

(a) Install the floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque: 14 N·m (143 kgf·cm, 10 ft·lbf)

(b) Install the indoor electrical key oscillator with the screw.

(c) Connect the 2 connectors.

2. CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

(a) Turn the control shaft lever RH of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.

(b) Move the shift lever to N.

(c) Temporarily install the floor shift gear shifting rod with the nut.

(d) Tighten the nut while lightly pushing the lever rearward.

Torque: 13 N·m (130 kgf·cm, 9 ft·lbf)

3. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

4. INSTALL COOLING BOX ASSEMBLY (w/ Cool Box)