Home › Vehicle Exterior › Lighting (ext) › BACK-UP LIGHT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: LX570 Doc ID: RM0000038WU003X
Title: LIGHTING (EXT): BACK-UP LIGHT ASSEMBLY: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL BACK-UP LIGHT LENS AND BODY LH

(a) Install the light lens and body with the 3 screws.

(b) Attach the clip and connect the connector.

(c) Install the bracket with the 2 screws.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

3. INSTALL BACK DOOR TRIM COVER RH DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

4. INSTALL BACK DOOR TRIM COVER LH DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

5. INSTALL REAR FLOOR MAT SUPPORT PLATE REAR INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 LX570)+