Home › Vehicle Exterior › Exterior Panels/Trim › BACK DOOR GARNISH (for Lower Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Exterior Panels/Trim
Model Year: 2008 Model: LX570 Doc ID: RM000003CJE001X
Title: EXTERIOR PANELS / TRIM: BACK DOOR GARNISH (for Lower Side): INSTALLATION (2008 LX570)

INSTALLATION

HINT:

A bolt without a torque specification is shown in the standard bolt chart SPECIFICATIONS: STANDARD BOLT: SPECIFIED TORQUE FOR STANDARD BOLTS (2008 LX570) .

1. INSTALL NO. 2 BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE



(a) Attach the 7 clips to install the garnish.

(b) Install the 2 nuts and connect the 2 connectors.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

3. INSTALL BACK DOOR TRIM COVER LH DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

4. INSTALL BACK DOOR TRIM COVER RH DOOR / HATCH: TAIL GATE: REASSEMBLY (2008 LX570)+

5. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 LX570)+