| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Park Assist/Monitoring | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003EA4000X |
| Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Rear): INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor retainer on the other side.
(a) Align the keyhole and protrusion as shown in the illustration.
(b) Install the ultrasonic sensor retainer to the rear bumper.
NOTICE:
Do not damage the bumper with the protrusion when installing the retainer.
2. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER
HINT:
Use the same procedure to install the No. 3 ultrasonic sensor retainer on the other side.
(a) Attach the claw to install the ultrasonic sensor retainer as shown in the illustration.
3. INSTALL NO. 2 ULTRASONIC SENSOR
HINT:
Use the same procedure to install the No. 2 ultrasonic sensor on the other side.
(a) Attach the 2 claws to install the ultrasonic sensor.
4. INSTALL NO. 3 ULTRASONIC SENSOR
HINT:
Use the same procedure to install the No. 3 ultrasonic sensor on the other side.
(a) Attach the 3 claws to install the ultrasonic sensor.
(b) Install the ultrasonic sensor clip.
5. INSTALL NO. 2 FRAME WIRE
6. INSTALL REAR BUMPER COVER
7. INSTALL REAR NO. 1 BUMPER PLATE
8. INSTALL REAR QUARTER PANEL MUDGUARD LH
9. INSTALL REAR QUARTER PANEL MUDGUARD RH
|
|