RX400h · Service Manual ENGINE

INSTALLATION

Removal / installation


1. INSTALL OIL PUMP SEAL

  1. Apply MP grease to a new oil seal lip.

    NOTICE:
    Keep the lip free from foreign objects.

  1. A108144E01
    Using SST and a hammer, tap in a new oil seal until its surface is flush with the oil pump edge.
    SST
    09223-00010  

    NOTICE:
    1. Do not tap the oil seal at an angle.
    2. Wipe off extra grease on the crankshaft.


2. INSTALL CRANKSHAFT TIMING PULLEY

  1. A078746E01
    Align the keyway of the pulley with the key located on the crankshaft and slide the pulley into place.

    NOTICE:
    Do not scratch the sensor area of the crankshaft timing pulley.

  1. Install the timing belt plate with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }


3. INSTALL TIMING BELT
(Click here)

4. CHECK FOR ENGINE OIL LEAKS
← REMOVALCOMPONENTS →