ADJUSTMENTS

The rear brakes are automatically adjusted while driving the vehicle. The brakes are also adjusted each time the parking brake is applied. Manual brake adjustment is only required after the brake shoes or hardware has been replaced, or the adjuster has been replaced.

1. Remove the brake drum as described in this section.
2. Remove any excessive dust and dirt present on the brakes using the appropriate methods.
3. Using a brake adjustment gauge, measure the inside diameter of the brake drum.
4. Adjust the brake shoes to the same diameter as the drum by placing the brake adjustment gauge on the shoes and turn the adjusting star wheel.
5. Install the brake drum as described in this section.