[ Model - ECLIPSE CROSS / Year - 2018 ]
2018 / ECLIPSE CROSS / EC - Workshop Manual
23 -AUTOMATIC TRANSMISSION > 23A-CVT > CVT-ECU, DC/DC CONVERTER > CVT-ECU, DC/DC CONVERTER REMOVAL AND INSTALLATION REMOVAL AND INSTALLATION
REMOVAL AND INSTALLATION
 
 
caution
  • Before commencing work, use the M.U.T.-IIISE to read out the serial No. from the old CVT-ECU, which you will replace, and make a note of it (Refer to ).
  • When the CVT-ECU is replaced, carry out the following operations.
    • Electric oil pump air bleeding (Refer to ).
    • Learning Procedure (Refer to ).
Pre-removal and post-installation operation
  • Instrument panel cover lower removal and installation (Refer to GROUP 52A - Instrument Lower Panel ). <LHD>
  • ETACS-ECU removal and installation (Refer to GROUP 54A - ETACS-ECU ). <RHD>
 
Removal steps
1.DC/DC converter
2.CVT-ECU
3.DC/DC converter bracket
4.CVT-ECU bracket