[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| note | Prior to diagnosis, check that the fuses for the power supply are not blown and the connectors are connected securely. |
| Trouble symptom | Inspection procedure number | Reference page |
| Cannot communicate with KOS&OSS-ECU using the M.U.T.-IIISE. | 1 |  |
| The keyless operation key cannot be registered using the M.U.T.-IIISE. | 2 | |
| Abnormality in KOS&OSS-ECU power supply and earth circuits. | 3 | |
| Keyless operation warning display does not disappear. | 4 | |
| No door will be locked or unlocked by operating a lock/unlock switch on any door. | 5 | |
| Front door lock/unlock switch does not work. | 6 | |
| The lock switch and open switch of the tailgate lock release handle do not work. | 7 | |
| Keyless entry function does not work. | 8 | |
| KOS timer lock function does not work. | 9 | |
| Keyless entry hazard answer back function does not work normally. | 10 | |
| Multimode keyless entry function does not work at all. | 11 | |
| Keyless operation buzzer does not sound. | 12 | |
| Vehicle power does not turn "ON" (Not possible with both of power supply mode "ACC" and "ON"). | 13 | |
| Engine does not start (Cranking is not performed). | 14 | |
| Vehicle power cannot be turned "OFF" when the shift position is in P (Power supply mode "ON" to "ACC" is possible). <CVT> | 15 | |
| Electric steering lock does not become locked (Power supply mode is "OFF"). | 16 | |
| ACC power auto cut function does not work normally. | 17 | |
| Vehicle power cannot be turned "OFF". | 18 | |