[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| caution | On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Diagnosis code No. | Diagnostic item | Reference page |
| B1E1D | +Battery Roomlamp Overload or Short Circuit |  |
| B1E1E | Roomlamp Control Overload or Short Circuit | |
| B1E20 | +Battery Roomlamp deactivated (FET failure) | |
| B1E21 | Roomlamp deactivated (FET failure) | |