[ Model - ECLIPSE CROSS / Year - 2018 ]
PRINT
PRINT (GROUP)
| caution | On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnosis code(s) associated with other system may be set. On completion, confirm all systems for diagnosis code(s). If diagnosis code(s) are set, erase them all. |
| Diagnosis code No. | Diagnostic item | Reference page |
| B16A2 | Turn signal(LH) bulb outage |  |
| B16A3 | Turn signal(LH) circuit short | |
| B16A4 | Turn signal(RH) bulb outage | |
| B16A5 | Turn signal(RH) circuit short | |
| B16A6 | Turn signal fuse blown | |
| B16A9 | Turn lamp(LH) deactivated | |
| B16AA | Turn lamp(RH) deactivated | |