DTC P2228 / P2229
Precautions: General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
DTC P2228: Barometric Pressure Sensor “A” Circuit Low Measured voltage of barometric pressure sensor signal circuit is lower than specified value. (3 D/C detection logic) |
Barometric pressure sensor (in ECM) |
|
DTC P2229: Barometric Pressure Sensor “A” Circuit High Measured voltage of barometric pressure sensor signal circuit is higher than specified value. (3 D/C detection logic) |
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
Was “Engine and Emission Control System Check” performed?
|
Go to Step 2.
|
|
| 2 |
Barometric pressure sensor check
1)Check that value of barometric pressure.
Is check result OK?
|
End.
|
Repair or replace defective part(s).
|