Tightening Torque Specifications
Precautions: General safety (00)
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Starting motor mount bolt | 25 | 2.5 | 18.5 |
 |
| Magnetic switch lead wire nut | 6.0 | 0.61 | 4.5 |
|
| Starting motor cable nut | 11 | 1.1 | 8.5 |
|
| Closure cap screw | 1.6 | 0.16 | 1.5 |
|
| Starter end frame bolt | 7.5 | 0.76 | 5.5 |
(Non-ENG A-STOP model) |
| Starter end frame bolt | 4.8 | 0.49 | 3.5 |
(ENG A-STOP model) |
| Magnetic switch bolt | 7.5 | 0.76 | 5.5 |
|
| Lead wire nut | 9.0 | 0.92 | 7.0 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: