Tightening Torque Specifications
Precautions: General safety (00)
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| CPP No.1 switch lock nut | 7.5 | 0.76 | 5.5 |
 |
| CPP No.2 switch lock nut | 7.5 | 0.76 | 5.5 |
|
| Clutch bleeder plug | 5.0 | 0.51 | 4.0 |
|
| Clutch master cylinder nut | 13 | 1.3 | 9.5 |
|
| Clutch operating cylinder assembly bolt | 10 | 1.0 | 7.5 |
|
| Clutch fluid pipe flare nut | 16 | 1.6 | 12.0 |
|
| Clutch cover bolt* | 5.0 N·m → 23 N·m (0.51 kgf-m → 2.3 kgf-m, 4.0 lbf-ft → 17.0 lbf-ft) |
|
||
| Clutch cover bolt | 23 | 2.3 | 17.0 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: