Keyless Entry Control Module Registration (Ignition Switch Model)
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Ignition Key (Ignition Switch Model) · Precautions for Transmitter Disposal (Ignition Switch Model) · Precautions for Replacing Keyless Entry Control Module (Ignition Switch Model) · Precautions for Body, Cab and Accessories · General safety (00)
After keyless entry control module is replaced with new one, register ignition key ID code in keyless entry control module using SUZUKI scan tool and security device.
1)Prepare all of ignition keys ready for registration.
2)Perform “Immobilizer Key Registration” in “Immobilizer” menu on SUZUKI scan tool. Refer to Operator’s Manual of SUZUKI scan tool for further details.
NOTE:
When ECM and keyless entry control module are replaced with new ones at the same time, perform “Immobilizer Key Registration” instead of “ECM Registration” using SUZUKI scan tool and security device. Refer to Operator’s Manual of SUZUKI scan tool for the immobilizer registration.