DTC B1680
Precautions: Precautions for Diagnosing Trouble · Precautions for Control Systems · General safety (00)
DTC Detecting Condition and Trouble Area
| DTC detecting condition | Trouble area |
|---|---|
|
B1680: CAN Invalid Data from ECM BCM detected abnormal condition in control data transmitted by ECM through CAN communication. |
ECM |
DTC Confirmation Procedure
1)Set ignition “ON”.
DTC Troubleshooting
| Step | Action | Yes | No |
|---|---|---|---|
| 1 |
DTC check
1)Check DTC in ECM.
•M16A model:
 •K14C model: •D16AA model: Is there any DTC(s) detected?
|
Go to troubleshooting for applicable DTC.
|
Replace ECM and recheck DTC.
•M16A model:
•K14C model: •D16AA model: |