Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Power Seat Type LH Side)

FRONT SEAT ASSEMBLY (for Power Seat Type LH Side) > DISASSEMBLY

for Preparation Click here



1. REMOVE FRONT SEAT HEADREST ASSEMBLY


2. REMOVE RECLINING POWER SEAT SWITCH KNOB
  1. Using a screwdriver, remove the reclining power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE SLIDE & VERTICAL POWER SEAT SWITCH KNOB
  1. Using a screwdriver, remove the slide & vertical power seat switch knob.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE FRONT SEAT CUSHION SHIELD INNER NO. 1 LH


    B065797E01
  1. Remove the 5 screws.

  1. Driver seat only:

    1. Using a screwdriver, disengage the 2 claws and remove the front seat cushion shield inner No. 1 LH with the front seat cushion shield LH, and then disconnect the connector.

      HINT:
      Tape the screwdriver tip before use.

  1. Passenger seat only:

    1. Using a screwdriver, disengage the 2 claws and remove the front seat cushion shield inner No. 1 LH with the front seat cushion shield LH.

      HINT:
      Tape the screwdriver tip before use.

  1. Remove the screw and front seat cushion shield inner No. 1 LH.



5. REMOVE POWER SEAT SWITCH ASSEMBLY
  1. Remove the 2 screws and power seat switch assembly.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH


7. REMOVE FRONT SEAT CUSHION SHIELD INNER LH


    B065449E01
  1. Remove the screw.

  1. Using a screwdriver, disengage the 2 claws and clip, and remove the front seat cushion shield inner LH.

    HINT:
    Tape the screwdriver tip before use.



8. REMOVE FRONT POWER SEAT SWITCH LH
  1. Disconnect the connectors.

  1. Remove the 3 screws and front power seat switch LH.



9. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
  1. Disengage the hook and remove the seat cushion cover together with the pad.



10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
  1. Remove the hog rings and seat cushion cover.



11. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH


12. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY
  1. Remove the 2 screws and front seatback board.



13. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


14. REMOVE FRONT SEAT HEADREST SUPPORT


    B060977
  1. Remove the 2 front seat headrest supports.



15. REMOVE SEPARATE TYPE SEATBACK COVER WITH PAD


    B065179
  1. with Side airbag:

    1. Remove the hog rings, nut and seatback cover bracket.

  1. Remove the hog rings and seatback cover together with the pad.



16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER
  1. Remove the hog rings and front seatback cover.



17. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH


18. REMOVE RECLINING ADJUSTER INSIDE COVER LH
  1. Remove the 2 screws and reclining adjuster inside cover LH (lower).

  1. Remove the screw and reclining adjuster inside cover LH (upper).



19. REMOVE RECLINING ADJUSTER INSIDE COVER RH
  1. Remove the 2 screws and reclining adjuster inside cover RH (lower).

  1. Remove the screw and reclining adjuster inside cover RH (upper).



20. REMOVE VERTICAL ADJUSTER BRACKET COVER OUTER
  1. Remove the screw and vertical adjuster bracket cover outer.



21. REMOVE VERTICAL ADJUSTER BRACKET COVER INNER
  1. Remove the screw and vertical adjuster bracket cover inner.



22. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY LH
  1. Remove the 2 screws and lumbar support adjuster assembly LH.



23. REMOVE SEAT POSITION AIR BAG SENSOR

HINT:
Click here



24. REMOVE FRONT SEAT CUSHION PROTECTOR


25. REMOVE SEAT WIRE NO. 2


26. REMOVE OCCUPANT DETECTION ECU

HINT:
Click here