Home › SUSPENSION & AXLE › TIRE AND WHEEL › TIRE PRESSURE WARNING SYSTEM

TIRE PRESSURE WARNING SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


If a normal code is displayed during DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting page.

TIRE AND WHEEL SYSTEM 
Symptom
Suspected area
See page
Tire pressure warning system does not operate.
1. Tire pressure monitor valve sub-assembly
-
2. Tire pressure monitor receiver assembly
-
3. Power source circuit
Click here
4. TC terminal circuit
Click here
5. Combination meter assembly
Click here
6. Tire pressure monitor ECU
-
DTC check cannot be done.
1. Power source circuit
Click here
2. TC terminal circuit
Click here
3. Tire pressure monitor ECU
-
Tire pressure warning light malfunctions.
1. Power source circuit
Click here
2. Tire pressure warning light circuit
Click here
3. Combination meter assembly
Click here
4. Tire pressure monitor ECU
-