1.INSPECT TIRE AND INFLATION PRESSURE
Check the tires for wear and proper inflation pressure (See page Suspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION).
2.INSPECT LIGHTS, HORN, WIPERS AND WASHERS
3.TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY
Where necessary, tighten all the parts of the chassis.
Front axle and suspension
Drivetrain
Rear axle and suspension
Brake system
Engine mounting, etc.
Where necessary, tighten all parts of the body.
Seat belt system
Seat
Doors and hood
Body mounting
Fuel tank
Exhaust pipe system, etc.
4.REPLACE AIR CONDITIONING FILTER
Remove the air conditioning filter (See page Vehicle Interior>HEATING / AIR CONDITIONING>BLOWER UNIT>DISASSEMBLY).
Visually inspect the surface of the air conditioning filter.
If the air conditioning filter is contaminated with foreign matter, replace it.
5.INSPECT REFRIGERANT AMOUNT FOR AIR CONDITIONER
Check the sight glass on the liquid tube (See page Vehicle Interior>HEATING / AIR CONDITIONING>REFRIGERANT>ON-VEHICLE INSPECTION).
6. TIRE ROTATION
7. FINAL INSPECTION
Check the operation of the body parts.
Hood
Auxiliary catch operates properly.
Hood locks securely when closed.
Front and rear doors
Door locks operate properly.
Doors close properly.
Back door
Door lock operates properly.
Seats
Seat adjusts easily and locks securely in any position.
Front seatback locks securely in any position.
Rear seatback locks securely in any position.
Folding-down rear seatbacks lock securely.
Be sure to deliver a clean vehicle. Especially check:
Steering wheel
Shift lever knob
All switch knobs
Door handles
Seats