Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM1440E _51 Engine / Hybrid System _056124 1GR-FE ENGINE CONTROL _0273867 CAMSHAFT POSITION SENSOR A

1GR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


PROCEDURE

Hide 11301M 3.REMOVE VVT SENSOR (for Intake Side of Bank 1)

a.
A221424

Disconnect the sensor connector.


b.

Remove the bolt and sensor.


Hide 4.REMOVE VVT SENSOR (for Exhaust Side of Bank 1)

a.
A221425

Disconnect the sensor connector.


b.

Remove the bolt and sensor.


Hide 5.REMOVE VVT SENSOR (for Intake Side of Bank 2)

a.
A221426

Disconnect the sensor connector.


b.

Remove the bolt and sensor.


Hide 6.REMOVE VVT SENSOR (for Exhaust Side of Bank 2)

a.
A225395

Disconnect the sensor connector.


b.

Remove the bolt and sensor.