Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › IGNITION COIL AND SPARK PLUG › 2009.08–2014.08
RM1440E _51 Engine / Hybrid System _056124 1GR-FE ENGINE CONTROL _0273869 IGNITION COIL AND SPARK PLUG A

1GR-FE ENGINE CONTROL  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 2.REMOVE AIR CLEANER CAP AND HOSE

a.
A224721

Remove the air cleaner cap and hose.

i.

Disconnect the mass air flow meter connector, vacuum hose and ventilation hose and detach the 4 clamps.


ii.

Loosen the clamp.


iii.

Unfasten the 4 hook clamps, and then remove the bolt and air cleaner cap and hose.



Hide 19500 3.REMOVE IGNITION COIL ASSEMBLY

a.
A221430

Disconnect the 6 ignition coil connectors.


b.

Remove the 6 bolts and 6 ignition coils.


Hide 19100P 4.REMOVE SPARK PLUG

a.

Remove the 6 spark plugs.