Home › Engine / Hybrid System › 1GR-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM1440E _51 Engine / Hybrid System _056124 1GR-FE ENGINE CONTROL _0273870 ENGINE COOLANT TEMPERATURE SENSOR A

1GR-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 17111 1.REMOVE INTAKE MANIFOLD

Hide 89422 2.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

A224780

a.

Disconnect the sensor connector.


b.

Using a 19 mm deep socket wrench, remove the sensor.


c.

Remove the gasket from the sensor.