23280
1.INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator.
| *1 | New O-Ring |
Install the fuel pressure regulator with the 2 bolts.
Connect the vacuum hose.
23802B
2.CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
17129
3.INSTALL INTAKE AIR SURGE TANK
Install the intake air surge tank (See page Engine / Hybrid System>1GR-FE INTAKE / EXHAUST>INTAKE MANIFOLD>INSTALLATION).
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
5.INSPECT FOR FUEL LEAK