Home › Engine / Hybrid System › 1GR-FE FUEL › FUEL PRESSURE PULSATION DAMPER › from 2014.08
RM1440E _51 Engine / Hybrid System _056126 1GR-FE FUEL _0273890 FUEL PRESSURE PULSATION DAMPER A

1GR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.
A225470E01
2.683,0.395 2.856,0.558 0.173,0.163 10 *1 2.649,0.486 2.507,0.486 2.507,0.486 2.143,1.014 false

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper assembly.

Text in Illustration
*1 New O-Ring


b.
A223051

Install the fuel pressure pulsation damper assembly to the fuel delivery pipe.


c.

Install the fuel pressure regulator holder.


Hide 17129 2.INSTALL INTAKE AIR SURGE TANK

a.

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).