33554
1.REMOVE SHIFT LEVER CAP
35970F
2.REMOVE POSITION INDICATOR HOUSING ASSEMBLY
Detach the 4 claws and remove the floor shift position indicator housing.
35906
3.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
Detach the wire connector clamp from the position indicator housing.
Rotate the indicator light wire socket counterclockwise to align the key part and remove the wire.
Remove the cap and bulb from the indicator light wire socket.
85903
4.REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY
Disconnect the shift lock solenoid connector from the shift lock control ECU.
Detach the 3 claws and remove the shift lock control ECU from the transmission floor shift.