Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM1440E _52 Drivetrain _056134 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0273945 SHIFT LEVER N

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  ADJUSTMENT  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When moving the shift lever from P to R with the ignition switch to on (IG) and the brake pedal depressed, make sure that it moves smoothly and correctly into position.


b.

Check that the shift lever does not stop when moving the shift lever from R to P, and check that the shift lever does not stick when moving the shift lever from D to S.


c.

Start the engine and make sure that the vehicle moves forward after moving the shift lever from N to D and moves in reverse after moving the shift lever to R.

If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the transmission floor shift assembly installation condition.


Hide 2.ADJUST SHIFT LEVER POSITION

a.

b.

Move the shift lever to N.


c.
C203381E01
1.358,0.382 1.530,0.547 0.171,0.165 10 *1 1.46,1.83 1.631,1.995 0.171,0.165 10 *1 2.491,1.697 2.700,1.881 0.209,0.184 10 *2 2.538,1.357 2.747,1.541 0.209,0.184 10 *2 1.814,1.007 1.672,0.481 1.672,0.481 1.574,0.481 false 1.846,2.23 1.762,1.92 1.762,1.92 1.665,1.92 false 2.452,2.097 2.368,1.787 2.368,1.787 2.466,1.787 false 2.34,1.133 2.424,1.443 2.424,1.443 2.521,1.443 false

Slide the slider in the direction shown in the illustration and pull out the lock piece.

Text in Illustration
*1 Slider
*2 Lock Piece


d.
C361848

Push the lock piece into the adjuster case and lock it.

NOTICE:

Make sure that the lock piece is completely locked by the slider.