Home › Drivetrain › A750F AUTOMATIC TRANSMISSION / TRANSAXLE › TRANSMISSION CONTROL CABLE
RM1440E _52 Drivetrain _056134 A750F AUTOMATIC TRANSMISSION / TRANSAXLE _0273946 TRANSMISSION CONTROL CABLE A

A750F AUTOMATIC TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  REMOVAL  


PROCEDURE

Hide 58810J 1.REMOVE CONSOLE BOX ASSEMBLY

a.

Remove the console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>REMOVAL).


Hide 33820B 2.REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Move the shift lever to N.


b.
C214423

Disconnect the transmission control cable end from the shift lever.


c.
C214430

Rotate the socket counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable from the shift lever retainer.

NOTICE:

Do not over-rotate the nut as it will come off the internal spring and the transmission control cable will not be reusable.



d.
C214587

Remove the nut and clip, and disconnect the transmission control cable assembly from the automatic transmission.


e.

Disconnect the end of the transmission control cable from the shift lever assembly.


f.
C129546

Remove the 2 nuts and disconnect the transmission control cable support.


g.
C216997

Remove the 2 nuts and detach the 3 claws, and then pull out the transmission control cable.