35111Y
1.REMOVE AUTOMATIC TRANSMISSION CASE O-RING
Remove the O-ring from the oil pump assembly.
2.FIX OIL PUMP ASSEMBLY
Place the oil pump body on the torque converter clutch.
| *1 | Torque Converter Clutch |
35617
3.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 3 oil seal rings.
35370
4.REMOVE STATOR SHAFT ASSEMBLY
Remove the 14 bolts and stator shaft from the oil pump body.
35301B
5.REMOVE FRONT OIL PUMP BODY O-RING
Remove the O-ring from the oil pump body.
Remove the oil pump body from the torque converter clutch.
35301
6.INSPECT FRONT OIL PUMP BODY SUB-ASSEMBLY
35370
7.INSPECT STATOR SHAFT ASSEMBLY
8.INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
35321
9.REMOVE FRONT OIL PUMP DRIVE GEAR
35322
10.REMOVE FRONT OIL PUMP DRIVEN GEAR
35301A
11.REMOVE FRONT OIL PUMP OIL SEAL
Using a screwdriver, pry out the oil seal.
Be careful not to damage the bushing or oil pump body.