Home › Suspension › FRONT SUSPENSION › FRONT STABILIZER BAR
RM1440E _53 Suspension _056139 FRONT SUSPENSION _0273985 FRONT STABILIZER BAR A

FRONT SUSPENSION  FRONT STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48811 1.INSTALL FRONT STABILIZER BAR

Hide 48815 2.INSTALL FRONT NO. 1 STABILIZER BAR BUSH

a.
G021678E10
1.198,0.865 1.198,0.417 1.198,0.417 0.844,0.417 false 0.646,0.354 0.885,0.552 0.24,0.198 10 false *1 2.375,1.396 2.625,1.594 0.25,0.198 10 false *b 2.448,0.281 2.688,0.49 0.24,0.208 10 false *a

Install the 2 front No. 1 stabilizer bar bushes.

HINT:
·

Install the bush to the inner side of the bushing stopper on the stabilizer bar.


·

Install the No. 1 stabilizer bush with the protrusion facing inward.



Text in Illustration
*1 Bushing Stopper
*a Vehicle Outer Side
*b Vehicle Front Side
V100135

Protrusion


Hide 48829A 3.INSTALL FRONT NO. 1 STABILIZER BRACKET LH

a.

Install the front No. 1 stabilizer bracket LH with the 2 bolts.

Torque:
49 N*m (500 kgf*cm, 36 ft.*lbf)


Hide 48824A 4.INSTALL FRONT NO. 1 STABILIZER BRACKET RH

HINT:

Use the same procedure described for the LH side.


Hide 48810 5.INSTALL FRONT STABILIZER LINK ASSEMBLY LH

a.

Install the front stabilizer link assembly LH with the 2 nuts.

Torque:
70 N*m (714 kgf*cm, 52 ft.*lbf)

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.



Hide 48820B 6.INSTALL FRONT STABILIZER LINK ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 7.INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY

a.

Install the 2 member braces with the 6 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)


Hide 51405A 8.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 52129B 9.INSTALL LOWER FRONT BUMPER COVER

a.

Install the front bumper cover lower with the 5 bolts and clip.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 10.INSTALL FRONT WHEEL

Torque:
103 N*m (1050 kgf*cm, 76 ft.*lbf)