Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › TRACTION OFF SWITCH
RM1440E _54 Brake _056142 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0274000 TRACTION OFF SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  TRACTION OFF SWITCH  INSPECTION  


PROCEDURE

Hide 84988F 1.INSPECT TRACTION CONTROL SWITCH (A-TRAC SWITCH)

a.
C214850E02
0.069,0.012 0.290,0.205 0.221,0.193 12 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 - 8 Pressed Below 1 Ω
Not pressed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(A-TRAC Switch)

If the result is not as specified, replace the traction control switch (A-TRAC switch).