If a malfunction is detected in the engine control system, the ECM sends a malfunction signal to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:
VSC
TRC
Downhill assist control
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1201 | A malfunction signal is received from the ECM. | Engine control system |
Check if an engine control system DTC is output (See page Engine / Hybrid System>1GR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
B