Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2009.08–2013.08
RM1440E _56 Audio / Visual / Telematics _056150 AUDIO / VIDEO _0274026 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  Cellular Phone cannot Send/Receive  


PROCEDURE

1.CHECK "BLUETOOTH" SETTINGS
a.

Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.




OK

2.CHECK CELLULAR PHONE

NG

SET SETTINGS CORRECTLY

2.CHECK CELLULAR PHONE
a.

Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.


OK:

Phone is "Bluetooth" compatible.




OK

3.CHECK SETTINGS

NG

END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

3.CHECK SETTINGS
HINT:

The cellular phone is unable to call under any of the following conditions.

·

The cellular phone is locked.

·

The directory is being transferred.

·

There is a network error.

·

Transmission is regulated.

·

The power is off.

·

The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).



a.

Check that the cellular phone settings are set correctly.

OK:

Cellular phone settings are set correctly.




OK

4.CHECK CELLULAR PHONE

NG

SET SETTINGS CORRECTLY

4.CHECK CELLULAR PHONE
a.

Check if the cellular phone can make a call.

OK:

Cellular phone can make a call.




OK

5.CHECK RECEPTION

NG

CELLULAR PHONE IS FAULTY

5.CHECK RECEPTION
a.

Set the cellular phone so that it can receive calls.


b.

Place the cellular phone close to the radio receiver assembly.


c.

Check the radio receiver assembly to confirm that a "Bluetooth" connection exists between the radio receiver assembly and phone.

OK:

Cellular phone has reception.




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE RADIO RECEIVER ASSEMBLY