55474C
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55475A
2.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55910R
3.REMOVE HEATER CONTROL ASSEMBLY
86120
4.REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET
Remove the 4 bolts.
Pull the radio receiver to detach the 6 clips on the backside of the radio receiver.
Disconnect the connectors and remove the radio receiver.
86211
5.REMOVE NO. 1 RADIO BRACKET
Remove the 3 screws and bracket.
86212
6.REMOVE NO. 2 RADIO BRACKET
Remove the 3 screws and bracket.