| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| 62-41 | An unsuitable disc is inserted. | ·
Disc ·
Radio receiver assembly |
| 62-42 | The disc cannot be read. |
After the inspection is completed, clear the DTCs.
Check that the disc is not deformed or cracked.
No deformation or cracks on the disc.
OK
NG
Disc cleaning
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
Do not use a conventional record cleaner or antistatic preservative.
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).
NEXT
Check for DTCs and check if the same trouble occurs again.
Malfunction disappears.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG
Replace the disc with another and recheck.
Replace the disc with another normal one.
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same trouble occurs again.
Malfunction disappears.
OK
NG