| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| 62-44 | An operation error in the CD mechanism. | Radio receiver assembly |
| 62-48 | Excess current is present in the CD player. | |
| 62-50 | A malfunction in the insertion/ejection system. |
After the inspection is completed, clear the DTCs.
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).
NEXT
Check for DTCs and check if the same trouble occurs again.
If DTCs are output frequently, replace the radio receiver assembly.
Malfunction disappears.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG