Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › 2009.08–2013.08
RM1440E _56 Audio / Visual / Telematics _056150 AUDIO / VIDEO _0274026 AUDIO AND VISUAL SYSTEM C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  62-78  DSP Error  


DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
62-78 An error occurs during the decode process (MP3/WMA). Radio receiver assembly

CAUTION / NOTICE / HINT

HINT:

After the inspection is completed, clear the DTCs.


NOTICE:
·

These codes may be output even if there is no malfunction.

·

If these codes are output frequently, replace the radio receiver assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER>REMOVAL).



PROCEDURE

1.CLEAR DTC

NEXT

2.CHECK FOR DTC
2.CHECK FOR DTC
a.

Check for DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.




OK

END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)

NG

REPLACE RADIO RECEIVER ASSEMBLY