These DTCs are stored when a malfunction occurs in the CAN communication circuit.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U0073 | CAN bus connection error | CAN communication system |
| U0140 | CAN reception error |
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR).
Recheck for DTCs and check if the same DTC is output again.
No DTCs are output.
OK
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
NG
(See pagePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)