Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2013.08
RM1440E _56 Audio / Visual / Telematics _056150 AUDIO / VIDEO _0274026 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  MirrorLink Function cannot be Started  


PROCEDURE

1.CHECK SMARTPHONE
a.

Check that the connected smartphone is powered on.

OK:

The connected smartphone is powered on.




OK

2.CHECK MULTI-DISPLAY

NG

TURN SMARTPHONE ON

2.CHECK MULTI-DISPLAY
a.

Check that "MirrorLink" is not illuminated on the information screen of the multi-display.

OK:

"MirrorLink" is not illuminated.




OK

3.CHECK SMARTPHONE

NG

4.CHECK APPLICATION
3.CHECK SMARTPHONE
a.

Refer to System Description and check if the connected smartphone is MirrorLink compatible (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION).

OK:

The connected smartphone is MirrorLink compatible.




OK

4.CHECK APPLICATION

NG

CONNECT MIRRORLINK COMPATIBLE SMARTPHONE

4.CHECK APPLICATION
a.

Refer to System Description and check if a MirrorLink compatible application is installed on the connected smartphone (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION).

OK:

A MirrorLink compatible application is installed.




OK

5.CHECK APPLICATION RUNNING STATUS

NG

INSTALL MIRRORLINK COMPATIBLE APPLICATION

5.CHECK APPLICATION RUNNING STATUS
a.

Connect the smartphone to the head unit with a MirrorLink compatible application running and check if the MirrorLink function can be used.

HINT:

The MirrorLink function may not start if the application is not running.


OK:

The MirrorLink function can be used.




OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY