55474C
1.REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55475A
2.REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
55910R
3.REMOVE HEATER CONTROL ASSEMBLY
86140A
4.REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKETS
Remove the 4 bolts.
Pull the radio and display receiver assembly with brackets as shown in the illustration to detach the 6 claws on the backside of the radio and display receiver assembly with brackets.
Disconnect each connector to remove the radio and display receiver assembly with brackets.
C8215
5.REMOVE HAZARD SWITCH WIRE
Detach the 2 clamps.
Disconnect the connector to remove the hazard switch wire.
86211J
6.REMOVE NO. 1 RADIO BRACKET
Remove the 3 screws and No. 1 radio bracket.
86212C
7.REMOVE NO. 2 RADIO BRACKET
Remove the 3 screws and No. 2 radio bracket.