Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM › from 2013.08
RM1440E _56 Audio / Visual / Telematics _056150 AUDIO / VIDEO _0274026 AUDIO AND VISUAL SYSTEM J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  MirrorLink Image is not Displayed  


PROCEDURE

1.CHECK USAGE CONDITION
a.

Check the conditions under which the MirrorLink function is being used.

Result:
Result Proceed to
An image is displayed while the vehicle is stopped. A
An image is not displayed while the vehicle is being driven or while the vehicle is stopped. B


HINT:

Some applications have a display restriction in consideration of safe driving.




A

END

B

2.CHECK APPLICATION
2.CHECK APPLICATION
a.

Refer to System Description and check if the application being used is MirrorLink compatible (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION).

HINT:
·

Some applications require payment.

·

The names of applications are subject to change.



Result:
Result Proceed to
The application being used is MirrorLink compatible, but its image is not displayed. A
The application being used is not MirrorLink compatible, and its image is not displayed. B


HINT:

Some applications have a display restriction in consideration of safe driving.




A

3.CHECK SMARTPHONE

B

USE MIRRORLINK COMPATIBLE APPLICATION AND CHECK AGAIN

3.CHECK SMARTPHONE
a.

Check if an image is displayed on the MirrorLink compatible smartphone when a MirrorLink compatible application is running and it is disconnected from the head unit.

OK:

An image is displayed.


HINT:

Restarting the smartphone may return the application operation to normal.




OK

4.CHECK APPLICATION RUNNING STATUS

NG

RESTART MIRRORLINK COMPATIBLE APPLICATION

4.CHECK APPLICATION RUNNING STATUS
a.

Connect the smartphone to the head unit with a MirrorLink compatible application running and check if the MirrorLink function can be used and an image is displayed.

OK:

An image is displayed.


HINT:

The MirrorLink function may not start if the application is not running.




OK

END

NG

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY