Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM › from 2013.08
RM1440E _56 Audio / Visual / Telematics _056151 PARK ASSIST / MONITORING _0274043 TOYOTA PARKING ASSIST-SENSOR SYSTEM D

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

This system uses No. 1 ultrasonic sensors to detect any obstacles at the corners and the rear of the vehicle. The system then informs the driver of the distance between the sensors and an obstacle as well as their positions by indicating them on the multi-information display (in the combination meter assembly) and by sounding a buzzer.



FUNCTION OF COMPONENTS


Components Function
Clearance warning ECU assembly Receives signals from the No. 1 ultrasonic sensor. Based on the received wave, the clearance warning ECU assembly calculates the approximate distance between the vehicle and obstacle, and sends a buzzer signal to the No. 1 clearance warning buzzer.
Back sonar or clearance sonar switch assembly Supplies electrical power to the sensors and outputs system on/off signals to the clearance warning ECU assembly.
No. 1 ultrasonic sensor The No. 1 ultrasonic sensor sends and receives ultrasonic waves.
Combination Meter Assembly (Multi-information Display) Transmits vehicle speed signal to the clearance warning ECU assembly.
·

Displays location of obstacle and approximate distance between vehicle and obstacle.

·

Informs driver if No. 1 ultrasonic sensors malfunction, or if they freeze or become dirty.


No. 1 clearance warning buzzer Sounds to inform the driver of the distance to the obstacle.
Park/neutral position switch assembly Sends a signal that activates the TOYOTA parking assist-sensor system when the shift lever is moved to R.


OPERATION EXPLANATION


a.

The clearance warning ECU assembly determines whether the TOYOTA parking assist-sensor system should be operated based on the back sonar or clearance sonar switch assembly on/off status and the shift position and the vehicle speed.


b.

When the system operates, the clearance warning ECU assembly transmits ultrasonic waves from the No. 1 ultrasonic sensors. If these waves encounter an obstacle within the range of one or more of the sensors, the waves are reflected back to the sensors, which transmit them to the clearance warning ECU assembly. Based on this information, the clearance warning ECU assembly sends signals to the combination meter assembly and the No. 1 clearance warning buzzer. The approximate distance between the vehicle and the obstacle is then indicated, and the buzzer sounds.

HINT:

Refer to "Operation Check" for the detailed operation (See page Audio / Visual / Telematics>PARK ASSIST / MONITORING>TOYOTA PARKING ASSIST-SENSOR SYSTEM>OPERATION CHECK).