84231E
1.INSPECT HOOD LOCK ASSEMBLY (ENGINE HOOD COURTESY SWITCH)
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Unlock position | Below 1 Ω |
| 1 - 2 | Lock position | 10 kΩ or higher |
If the result is not as specified, replace the hood lock assembly.
| *a | Unlock Position | *b | Lock Position |
| *c | Component without harness connected
(Hood Lock Assembly (Engine Hood Courtesy Switch)) |
- | - |