Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY HORN ASSEMBLY
RM1440E _58 Vehicle Interior _056156 THEFT DETERRENT / KEYLESS ENTRY _0274070 SECURITY HORN ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY HORN ASSEMBLY  INSPECTION  


PROCEDURE

Hide 1.INSPECT SECURITY HORN ASSEMBLY

a.

Apply battery voltage to the horn connector and check the operation of the horn.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Horn bracket
Horn sounds


If the result is not as specified, replace the security horn assembly.